CAMERA TRAP INFO

This ARTICAL WILL OFFER SOME "Behind the Image" Information On How I Achieve My DSLR Camera Trap Images.

 

TARGET SPECIES: HEDGEHOG

Conservation Status: Vulnerable to Extinction

Protected Species in the UK under the Wildlife & Countryside Act 1981

In the summer of 2022, I set out to attempt to photograph one of the UK’s most lovable nocturnal mammals.
 
With my back yard offering a bounty of wild foods I was keen to see who was visiting the garden at night.
 
Over the duration of a few weeks I had set up wildlife trail cameras in different locations around the garden to monitor the movements of any possible nocturnal visitors. And to my amazement I had 3 different hedgehogs snuffling around most evenings.
 
For many years I have been wanting to photograph hedgehogs but due to their secretive lifestyle & night time shenanigans this was always going to be a difficult challenge.
 
Having done research into DSLR Camera Traps & PIR sensors I knew that this type of photography would help me achieve my goal of being able to take close up intimate images of a variety of different wildlife species.
 
Creating my own homemade DSLR Camera Trap Housing case paired with a Camtraptions PIR sensor I was finally confident that this home grown hedgehog project was going to be a successful venture. It was now time to deploy my DSLR camera trap in the target location with the most activity. After a few weeks of patience I was finally rewarded with a series of images of the UK’s most adorable nocturnal mammal.
 
This image I captured of a rural hedgehog offers us just a tiny glimpse into the secret world of these elusive animals.
 
Date & Time: 24 July 2022 at 1:57 pm
Camera Settings: ¹/250s/F8/iso-160. (Nikkor lens at 18mm) x2 SB24 Flashes Manual Mode.

EQUIPMENT

NIKON D3300

CAMTRAPTIONS V2 MOTION SENSOR.

MAX CASE : HARD CAMERA CASE WITH FOAM INSERT: REF-MAX235H155

80MM HOLE SAW DRILL BIT.

ECO- FILTRATION 82MM

3INCH KOI FISH TANK FILTER FLANGE PIPE FITTING.

PROFEZZION 82MM UV FILTER.

82MM METAL LENS HOOD

GORILLA ALL CONDITIONS SEALANT

GORILLA SUPER GLUE GEL

100MM QUICK RELEASE PLATE

NIKON SPEEDLIGHT SB24 X2

SMALL RIG 9.5 ADJUSTABLE ARM

YOUNGNUO RF-603N11 WIRELESS FLASH TRIGGERS X3

WHAM 2.6 LTR CRYSTAL BOX & LID FOR FLASH HOUSING

1/4 MINI TRIPOD BALL HEAD X4

SPEEDLIGHT HOT SHOE MOUNT STAND

CAMOFLARGE DUCT TAPE: REAL TREE

THE BUILD

Making a custom Camera Trap Housing Case is quite straight forward and I am going to try and keep this simple.

Marking out on the front of the case where I wanted the opening, I used a drill and the 80mm Hole Saw drill bit to cut out the opening so that the camera lens can peep out from the case.

Using a hacksaw I cut the threads from the back of the koi flange pipe so it can be mounted flush onto the case. Applying a generous amount of silicone sealant onto the back of the flange pipe I then placed it in position over the opening creating a portal style window.

I then left the silicone around the flange pipe to cure for the next 24hrs before continuing with the build.

With the silicone sealant now cured and the flange pipe securely stuck into position the next job was to fit the 82mm UV filter into the 82mm flange pipe opening. The filter fit perfectly into position on the flange pipe opening so all I had to do now was run a small bead of Superglue around the UV filter to fix it into position.

Allowing the superglue to dry for a few hours I then screwed the 82mm Metal lens Hood into the threads onto the UV filter. I did this to add some extra weather protection from the elements, hopefully stopping any possible splash back from the rain or dirt going onto the filter.

Next I needed to add a quick release plate onto the bottom of the camera housing case so it can be mounted onto a tripod.

Marking out where I wanted the plate to go on the bottom of the case, I then drilled out two holes and mounted it all together with a few nuts and bolts and then fixed it all together.

After some design options I decided to mount the camtraption motion sensor onto the camera housing case.

Using an adjustable CCTV Camera Bracket I began to drill out a hole in the front of the case in the top left hand side. Then pushing the mount threads into the drilled out hole I threaded a nut on the inside and tightened it all together.

The Camtraptions V2 motion sensor uses a cable that needs to be connected into the camera body. Using a drill bit the same size in diameter as the cable, I removed the rubber gasket from around the housing case door opening and closed the door shut. I then drilled a hole in the bottom left hand side of the case just above the hinge. With the hole now drilled out this will now allow the cable to fit into the housing.  I then placed the rubber gasket back into the door opening helping create a weather seal around the sensor cable that’s going into the case. Now when the door is closed shut the cable is not pinched allowing the sensor to work.

The camera hard case already come with foam inserts so all I had to do was to pluck out the little foam cubes to my desired camera body size and just like that shazam the build was completed.

 

Flash’s & Housing:

I was able to track down a few Nikon SB24 speedlight flashes for around £25 each. So far the Nikon SB24’s have been fantastic for the jobs required. Although the desired flashes for this type of photography are the sb28’s, I found them to be quite rare to track down and really quite expensive so I just went for the little brother versions.

Pairing the Yongnuo RF-603N11 Wireless Flash Triggers with the flashes and one connected onto the camera body’s hot shoe. And just like magic, once the camtraption sensor is triggered is sends a signal to the camera and the whole system triggers including the flashes.

I spent a while looking for what I could used as a suitable option for housing cases for the flashes and then finally I come across some Wham 2.6 ltr Crystal box & Lids at a craft shop. I mounted the flashes inside the box’s and wrapped them with camouflage tape for a more natural finish.

PIR SENSOR

Camtraptions PIR Motion Sensor

After looking on the market at different PIR sensors it seemed clear to me that one of the best options on the market was a UK based company called Camtraptions. They make top quality, robust & waterproof PIR motion sensors for the use of wildlife photography and video recording.

I am still figuring out the switch systems, dials & settings.

The device connects to the camera body via a shutter release cable and when the sensor detects any motion it sends a signal to the camera and will take a series of images or video depending on your settings.

The Motion Sensor is powered by 6 AA batteries and states it’s able to last several months on a single set of batteries. Happy days!!

THE SET UP

Using two flashes one was mounted in an elevated position to create an over head lighting onto the scene, and the other flash was mounted onto a tripod that is just above ground level to illuminate the target area.

With the camera trap system all setup and focused into the target area all I had to do now was wait for the hedgehogs to trigger the set up.

Over the course of a few evenings I was rewarded with multiple images, not only of my target species but also a variety of other garden mammals & birds.

 

CAMERA SETTINGS

Camera Manual Mode – 1/200s – F8 APETURE – ISO 400 – Focal length 18mm

Nikon Nikkor AF-P lens. Flashes are set manually at 24mm/F8/ISO 400 / 1/16 power

I used these settings as a base rule and will dial in over the duration of the camera trap being deployed.

FINAL THOUGHTS

 I really enjoy setting up this type of camera gear and while I am not on site to take the photo’s I have found that DSLR camera trapping is extremely rewarding as I have been able to achieve close up intimate images of wildlife.

It took me around 4 months to collect all the necessary equipment for this home grown project and now I have this specialist camera equipment in my collection I am looking foward to capturing many more images of different types of wildlife species.

I hope you have found this article has offered you some use or just a simple glimpse into DSRL Camera Trapping.

Thanks for reading and keep it Wild.

DSLR Camera Trap Images

Images Protected by Copyright Law. © All Rights Reserved

Scroll to Top